CNC-Step KinetiC-NC - Initial Start-up; User information

KinetiC-NC
User Manual
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 22
Support: +49 (0)2831/91021-50
10.11.2018
4 Initial Sta rt-up
The first time you start the software, you will be asked for the language first .
Then a list of known machines is displayed, for which there are already predefined parameter.
User information
During the first start of the software its necessary to enter the user details. This can be important if
you need support or you want to add additional options.