54
Chapter10 Maintenance & cleaning
10.1 Maintenance check
Before monitoring patients, you shall:
♦ Check whether there is any physical damage;
♦ Check all the disclosed leads, plugs, and accessories;
♦ Check all the functions to be used to monitor the patients and ensure the equipment
works well; if any phenomenon is observed with the possibility of damaged
functions, the Monitor shall not be used onto the patients and please contact the
biochemical engineers of your hospital or the maintenance engineers of our
company.
♦ Comprehensive checks, including safety checks, must be conducted by qualified
personnel once per 6-12 months and after each time of repair.
Warning
if any hospital or agency responsible for using the Monitor fails to implement a set of
satisfying maintenance plan, unusual functional failure may be resulted to the Monitor
and may threaten the people’s health.
10.2 Cleaning and Sterilization
10.2.1 Note on Cleaning and Sterilization
Attention
z The monitor and accessory surface can be cleaned with hospital-grade ethanol and
dried in air or with soft, clean cloth.For protecting the environment, disposable
accessories should be recycled or disposed of properly.
Caution
z Do not autoclave the sensor.
To Next Page
Loading...