45
altogether 15 types. At one time, only one type of medicine can be selected for calculation.
Caution
The above introduced A, B, C, D, and E are not actual medicine names but only codes
for medicines. Units for these five types of medicines are fixed, and operators can select
proper units based on general practice of medicines. The expression rules of their units
are as follows:
Medicines A, B, and C are fixed under the “mg” unit series, including g, mg, and mcg; Medicine
D is fixed under the “unit” unit series, including unit, k unit, and m unit; and Medicine E is fixed
under the “mEq” unit.
Patient weight: When entering the medicine calculation window, operators should firstly or
secondly input patient weight, which will be taken as independent information for calculation of
medicine contents.
Caution
This function of medicine calculation is only to provide a medicine calculator, while
values in the list should not be related with the patient under monitoring. Thus the
patient weight under this menu is different from the patient weight in the system; when
the system refresh with a new patient, values in this menu will not be affected.
7.2 TITRATION
7.2.1.1 Enter the Titration list:
In the “Drug Calculation” menu, pitch on the “Titration” to enter the Titration list interface.
The Titration list interface for medicines is shown in the following Figure:
To Next Page
Loading...