85
The cable for the equipment of electrosurgery can’t be twisted together with the sensor
cable.
Warning
Please don’t place the senor on the limb with arterial duct or vein injection syringe.
Caution
Please don’t place SpO2 detector and cover on the same limb for measurement of blood
pressure, because in the course of measuring blood pressure the vascular obstruction
will affect the BOS reading.
13.2 Precautions in SpO2/Pulse Monitoring
Caution
Guarantee the nail can shut out the light.
The detector cable should be fixed on the back of hand.
Caution
SpO2 value always displays at the fixed place.
Only in the following cases PR will appear:
♦ In ECG menu, set “HR Source” as SPO2 or all.
♦ In ECG menu, set “HR Source” as “AUTO” and there is no ECG signal at this time.
Caution
SpO2 waveform and pulse are out of proportion.
Warning
Prior to monitoring, the first inspection should be given to whether the sensor cable is
normal. SpO2 sensor cable being pulled out of the jack, the screen will display the
“Sensor Off” mistaken information, and trigger the sound alarm.
Warning
Where the sensor packing or the sensor has the sign of damage, please don’t use this
SpO2 sensor, but return it to the manufacturer.
Warning
Continuous and overlong monitoring may increase the undesirable dangers that skin
features change, such as extraordinary sensitivity, reddening, blistering or pressure
To Next Page
Loading...