83
RR too high
RESP measurements higher than the set
alarm upper limit
User-selectable
RR too low
RESP measurements lower than the set
alarm upper limit
User-selectable
Apnea
Breathing not detectable within a specific
time interval
High
Table 12-2
Technical alarm:
Prompt
information
Cause
Alarm
level
Countermeasure
RESP alarm limit
fault
Functional safety
failure
High
Stop using RESP alarm function, notice
biomedical engineer or maintenance personnel
of Our company.
Table 12-3
Prompt information (including the general alarm information):
Prompt information Cause Alarm level
RR beyond measurement range
RR measurements beyond measurement
range
High
Table 12-4
12.6 Maintenance & Cleaning
Please see Chapter 10 maintenance, cleaning and disinfection
To Next Page
Loading...