25
3.10 WAVE RECALL
In “main menu” selected the “WALL RECALL-Condition”could be recall the parts information or
all information within memory data , following with figure below
Fig 3-12 WAVE RECALL-Condition
Setup the review types of the recall events and times , enter in “WAVE RECALL-Condition”
selected “WAVE RECALL ” would be display the window , following with figure below:
Fig 3-13 WAVE RECALL
3.11 INFO (Monitoring Information)
In the “MAIN MENU” select the “INFO” to look through the version information of the software
and hardware.
To Next Page
Loading...