DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
101
After clicking the Show Detail button, the following window will appear.
Figure 5-45 IGMP Snooping Settings (Show Detail) Window
The window displays the detail information about IGMP snooping VLAN.
Click the Modify button to edit the information in the following window.
After clicking the Modify or Edit button in IGMP Snooping Settings window, the following window will appear.
Figure 5-46 IGMP Snooping Settings (Modify, Edit) Window
The fields that can be configured are described below:
Parameter Description
Minimum Version
Select the minimum IGMP host version that is allowed on the VLAN. Options to
choose from are 1, 2, and 3.
Fast Leave
Select this option to enable or disable the IGMP snooping Fast Leave function. If
enabled, the membership is immediately removed when the system receives the
IGMP done message from the last member. When fast leave is enabled, the
Switch will not generate specific queries. When fast leave is disabled, the Switch
will generate specific queries.
Querier State
Select this option to enable or disable the querier state.
Query Version
Select the general query packet version sent by the IGMP snooping querier.
Options to choose from are 1, 2, and 3.
Query Interval
Enter the interval at which the IGMP snooping querier sends IGMP general query
messages periodically. The range is from 1 to 31744.
Max Response Time
Enter the maximum response time, in seconds, advertised in IGMP snooping
queries. The range is from 1 to 25.
To Next Page
Loading...
