DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
104
The fields that can be configured in IGMP Snooping Mrouter Table are described below:
Parameter Description
VID
Enter the VLAN ID used here. The range is from 1 to 4094.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IGMP Snooping Statistics Settings
This window is used to view and clear the IGMP snooping related statistics.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping
Statistics Settings, as shown below:
Figure 5-49 IGMP Snooping Statistics Settings Window
The fields that can be configured in IGMP Snooping Statistics Settings are described below:
Parameter Description
Statistics Select the interface here. Options to choose from are All, VLAN, and Port.
VID Enter a VLAN ID between 1 and 4094. This is available when VLAN is selected in
the Statistics drop-down list.
From Port - To Port
Select the appropriate port range used for the configuration here. This is available
when Port is selected in the Statistics drop-down list.
Click the Clear button to clear the IGMP snooping related statistics.
The fields that can be configured in IGMP Snooping Statistics Table are described below:
Parameter Description
Find Type Select the interface type. Options to choose from are VLAN, and Port.
VID
Enter a VLAN ID between 1 and 4094. This is available when VLAN is selected in
the Find Type drop-down list.
From Port - To Port
Select the appropriate port range used for the configuration here. This is available
when Port is selected in the Find Type drop-down list.
To Next Page
Loading...
