xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
VLAN Precedence Settings
This window is used to configure VLAN precedence settings.
To view this window, click L2 Features > VLAN > Subnet VLAN > VLAN Precedence Settings, as shown below:
Figure 3- 21. VLAN Precedence Settings window
Parameter Description
Unit
Select the switch in the switch stack to be modified.
From/To
These two fields allow the range of ports that will be included in the VLAN precedence.
VLAN
Precedence
Use the pull-down menu to select the VLAN precedence as MAC-based VLAN or Subnet VLAN.
Click Apply to implement the changes.
108
To Next Page
Loading...
Need help?
General