xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Rename
The following window is used to rename files that are presently located in the Flash memory of the Switch. To rename a file,
simply type the path and name of the current file (ex. c:/triton) into the Old File Name field, and then the new file and path into
the New File Name field and click Apply. Remember, the path must be included in both fields, which is c:/ on this Switch. Users
may return to the Directory window to view changes made in the file names.
To view this window, click Administration > File System Services > Rename, as shown below:
Figure 2- 37. Rename window
Copy
This window is used to copy a directory located within the Flash memory of the switch.
To view this window, click Administration > File System Services > Copy, as shown below:
Figure 2- 38. Copy File window
This window offers the following fields to aid the user in copying files located in the Flash memory of the Switch.
Parameter Description
Unit
Use the drop down menu to select the unit you wish to configure.
Source File (Full Path)
Enter the full path and file name of the directory to be copied. This entry cannot exceed 64
characters in length.
Target File (Full Path)
Enter the file name of the directory and the path to place the copy. This entry cannot
exceed 64 characters in length.
Click Copy to initiate copying the file.
41
To Next Page
Loading...
Need help?
General