xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
BGP Community List Settings
This window is used to configure the matching rules for a BGP community list.
To view this window, click L3 Features > BGP > BGP Community List Settings, as shown below:
Figure 4- 144. BGP Community List Settings window
To configure BGP AS community list settings on the Switch, complete the following fields:
Parameter Description
Type
Toggle between Standard and Expanded. Standard configures a standard community list and
Expanded configures an expanded community list.
List Name
Enter the name of community list to be configured.
Click Apply to implement changes made.
BGP Trap Settings
This window is used to configure the BGP trap state.
To view this window, click L3 Features > BGP > BGP Trap Settings, as shown below:
Figure 4- 145. BGP Trap Settings window
To configure BGP trap settings on the Switch, complete the following fields:
Parameter Description
Peer Established
Trap State
Enable or disable the sending of the peer established trap.The default value is Disabled.
Peer Idle Trap State
Enable or disable the sending of the peer idle trap. The default value is Disabled.
Click Apply to implement changes made.
286
To Next Page
Loading...
Need help?
General