xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
DHCPv6 Server Dynamic Binding Settings
This window is used to display the DHCPv6 dynamic binding information. Entering the command without the pool name will
display all information regarding DHCPv6 dynamic binding on the switch. This command only displays the dynamic binding
information, not including manual binding information.
To view this window, click L3 Features > DHCPv6 Server > DHCPv6 Server Dynamic Binding Settings, as shown below:
Figure 4- 89. DHCPv6 Server Dynamic Binding Brief Table window
The following parameter may be configured:
Parameter Description
Pool Name
Enter the pool name.
Clicking the View button will reveal the following window to configure:
Figure 4- 90. DHCPv6 Server Dynamic Binding Table window
243
To Next Page
Loading...
Need help?
General