xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
To configure BGP confederation settings on the Switch, complete the following fields:
Parameter Description
Confederation
Identifier (0-65535)
Enter an Autonomous System number which is used to specify a BGP confederation. If it is
set to zero, the BGP confederation number is deleted. By default, this setting is zero.
Confederation Peer
Action
Toggle between Add and Delete.
Confederation Peer
AS Number List (1-
65535)
Enter one or multiple AS number partitions, each separated by a comma. These are the
Autonomous System numbers for BGP peers that will belong to the confederation.
Click Apply to implement changes made.
BGP AS Path Access List Settings
This window is used to configure an Autonomous System path access list.
To view this window, click L3 Features > BGP > BGP AS Path Access List Settings, as shown below:
Figure 4- 143. BGP AS Path Access List Settings window
To configure BGP AS path access list settings on the Switch, complete the following fields:
Parameter Description
List Name
Enter an Autonomous System path access list name.
Click Apply to implement changes made.
285
To Next Page
Loading...
Need help?
General