xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Device Information
This window contains the main settings for all major
functions of the Switch and appears automatically when
you log on. To return to the Device Information
window, click the DGS-3600 Web Management Tool
folder. The Device Information window shows the
Switch’s MAC Address (assigned by the factory and
unchangeable), the Boot PROM, Firmware Version,
Hardware Version and Serial Number. This information
is helpful to keep track of PROM and firmware updates
and to obtain the Switch's MAC address for entry into
another network device's address table, if necessary.
The user may also enter a System Name, System
Location and System Contact to aid in defining the
Switch. In addition, this window displays the status of
functions on the Switch to quickly assess their current
global status. Some functions are hyper-linked to their
configuration window for easy access from the Device
Information window.
NOTE: DGS-3612/DGS-3612G/
DGS-3627/DGS-3627G/DGS-3650
Switch series will display the serial
number in the Device Information
window for Firmware version Build
2.80.B16.
Figure 2- 1. Device Information window
The configurable fields are described below:
Parameter Description
System Name Enter a system name for the Switch, if so desired. This name will identify it in the Switch
network.
System Location
Enter the location of the Switch, if so desired.
5
To Next Page
Loading...
Need help?
General