xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
IP Route Filter
IP Prefix List Settings
This window is used to create and configure an IP prefix list.
To view this window, click L3 Features > IP Route Filter > IP Prefix List Settings, as shown below:
Figure 4- 152. IP Prefix List Settings window
The IP prefix list table parameters are described below:
Parameter Description
IP Prefix List Settings
Prefix List Name
Enter the name to identify the prefix list.
IP Prefix List Counter Clear
Prefix List Name
Enter the name of the prefix list that will be cleared.
IP Address
Enter the IP address to be cleared.
Mask Address
Enter the mask address to be cleared.
Click Apply to implement changes made.
294
To Next Page
Loading...
Need help?
General