xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Secondary Name
Server
Allows the entry of the IP address of a secondary domain name server (DNS).
DNSR Cache Status
This can be toggled between Disabled and Enabled. This determines if a DNS cache will be
enabled on the Switch.
DNSR Static Table
State
This field can be toggled using the pull-down menu between Disabled and Enabled. This
determines if the static DNS table will be used or not.
Click Apply to implement changes made.
DNS Relay Static Settings
This window is used to set the DNS Relay Static Settings on the Switch.
To view this window, click L3 Features > DNS Relay > DNS Relay Static Settings, as shown below:
Figure 4- 98. DNS Relay Static Settings window
To add an entry into the DNS Relay Static Table, simply enter a Domain Name with its corresponding IP address and click Add
under the Apply heading. A successful entry will be presented in the table below, as shown in the example above. To erase an
entry from the table, click its corresponding
under the Delete heading.
249
To Next Page
Loading...
Need help?
General