D-Link DGS-3627G - xStack Switch - Stackable User Manual

xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 4- 17. Route Preference Settings window
The following fields can be set:
Parameter Description
RIP (1-999)
Enter a value between 1 and 999 to set the route preference for RIP. The lower the value,
the higher the chance the specified protocol will be chosen as the best path for routing
packets. The default value is 100.
Static (1-999)
Enter a value between 1 and 999 to set the route preference for Static. The lower the value,
the higher the chance the specified protocol will be chosen as the best path for routing
packets. The default value is 60.
Default (1-999)
Enter a value between 1 and 999 to set the route preference for Default. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 1.
OSPF Intra (1-999)
Enter a value between 1 and 999 to set the route preference for OSPF Intra. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 80.
OSPF Inter (1-999)
Enter a value between 1 and 999 to set the route preference for OSPF Inter. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 90.
OSPF ExtT1 (1-999)
Enter a value between 1 and 999 to set the route preference for OSPF ExtT1. The lower
the value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 110.
OSPF ExtT2 (1-999)
Enter a value between 1 and 999 to set the route preference for OSPF ExtT2. The lower
the value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 115.
EBGP (1-999)
Enter a value between 1 and 999 to set the route preference for EBGP. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 70.
IBGP (1-999)
Enter a value between 1 and 999 to set the route preference for IBGP. The lower the value,
the higher the chance the specified protocol will be chosen as the best path for routing
packets. The default value is 130.
Click Apply to implement changes made.
186

D-Link DGS-3627G - xStack Switch - Stackable Specifications

General

Brand	D-Link
Model	DGS-3627G - xStack Switch - Stackable
Category	Switch
Language	English