EasyManuals Logo

D-Link DGS-3627G - xStack Switch - Stackable User Manual

D-Link DGS-3627G - xStack Switch - Stackable
546 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #415 background imageLoading...
Page #415 background image
xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Cache Timeout (60-
86400 sec)
This field will set the time between a new key exchange between a client and a host using
the SSL function. A new SSL session is established every time the client and host go
through a key exchange. Specifying a longer timeout will allow the SSL session to reuse the
master key on future connections with that particular host, therefore speeding up the
negotiation process. The default setting is 600 seconds.
Ciphersuite
RSA with RC4 128
MD5
This ciphersuite combines the RSA key exchange, stream cipher RC4 encryption with 128-
bit keys and the MD5 Hash Algorithm. Use the pull-down menu to enable or disable this
ciphersuite. This field is Enabled by default.
RSA with 3DES EDE
CBC SHA
This ciphersuite combines the RSA key exchange, CBC Block Cipher 3DES_EDE
encryption and the SHA Hash Algorithm. Use the pull-down menu to enable or disable this
ciphersuite. This field is Enabled by default.
DHE DSS with 3DES
EDE CBC SHA
This ciphersuite combines the DSA Diffie Hellman key exchange, CBC Block Cipher
3DES_EDE encryption and SHA Hash Algorithm. Use the pull-down menu to enable or
disable this ciphersuite. This field is Enabled by default.
RSA EXPORT with
RC4 40 MD5
This ciphersuite combines the RSA Export key exchange and stream cipher RC4 encryption
with 40-bit keys. Use the pull-down menu to enable or disable this ciphersuite. This field is
Enabled by default.
NOTE: Certain implementations concerning the function and configuration of SSL
are not available on the web-based management of this Switch and need to be
configured using the command line interface. For more information on SSL and its
functions, see the DGS-3600 Series CLI Reference Guide, located on the
documentation CD of this product.
NOTE: Enabling the SSL command will disable the web-based switch management.
To log on to the Switch again, the header of the URL must begin with https://.
Entering anything else into the address field of the Web browser will result in an
error and no authentication will be granted.
399

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DGS-3627G - xStack Switch - Stackable and is the answer not in the manual?

D-Link DGS-3627G - xStack Switch - Stackable Specifications

General IconGeneral
BrandD-Link
ModelDGS-3627G - xStack Switch - Stackable
CategorySwitch
LanguageEnglish

Related product manuals