xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Server IPv4
Address
Enter the IPv4 address of the server from which to upload or download firmware and
configuration and upload log.
Server IPv6
Address
Enter the IPv6 address of the server from which to upload or download firmware and
configuration and upload log.
Domain Name
Enter the domain name of the TFTP server.
Local File Name
Enter the path and filename of the firmware or configuration file to upload or download, located
on the TFTP server.
Unit Number
Select the unit to configure, or tick the ALL check box to select all available units.
Image File in Flash
To select a firmware file from the internal Flash drive to be transferred, or to load a firmware file
on to the Flash drive, enter the path and filename here and tick the corresponding check box.
Remember, the only path that can be used on the flash is named C:\ (ex. C:\runtime.had)
Configuration File
in Flash
To select a configuration file from the internal Flash drive to be transferred, or to load a
configuration file on to the Flash drive, enter the path and filename here and tick the
corresponding check box. Remember, the only path that can be used on the flash is named C:\
(ex. C:\configuration.had)
Filter
This is used to filter the configuration data that relates to upload configuration.
Click Start to initiate the file transfer.
37
To Next Page
Loading...
Need help?
General