Danfoss FC 300 Design Guide

FC 300 Design Guide
How to Program
Main Me nu w/o P assword is set to Full access
[0], this parameter will be ignor ed.
0-61 Access to Main Menu w/o Password
Option:
*
Full access [0]
Read only [1]
No access [2]
Function:
Select Full access [0] to disable the password
defined in p ar. 0-60 Main Menu P assword.Select
Read only [1] to prevent unauthorised editing of
Main Menu parameters. Select No access [2] to
prevent unauthorised viewing and editing of Main
Menu parameters. If Full access [0] is selected then
parameters 0-60, 0-65 and 0-66 will be ignored.
0-65 Quick Menu Password
Range:
0 - 9999
*
200
Function:
Define the password for access to the Quick Menu
via the [Quick Menu] key. If par. 0-66 Access to
Quick Menu w/o Password is set to Full access
[0], this parameter will be ignor ed.
0-66 Access t o Quick Menu w/o Password
Option:
*
Full access [0]
Read only [1]
No access [2]
Function:
Select Full access [0] to disable the password
defined in par. 0-65 Quick Menu Password.Se
lect
Read only [1] to prevent unauthorised editing of
Quick Menu parameters. Select No access [2]
to prevent unauthorised viewing and edit
ing of
Quick Menu parameters. If par. 0-61 Access to
Main Menu w/o Password is set to Full access [0]
then thi s parameter will be ignore
d.
*
default setting ()display text []value for use in communication via serial communication port
158
MG.33.B
6.22 - V LT is a registered Danfoss trademark

Danfoss FC 300 Specifications

General

Brand	Danfoss
Model	FC 300
Category	DC Drives
Language	English