Danfoss FC 300 Design Guide

FC 300 Design Guide
How to Program
Function:
This parameter displays a list of all the
defined frequency converter parameters
available for Profibus.
9-82 Defined Parameters (3)
Array [1000]
Option:
No LCP access
Read-only
0 - 9999
*
0
Function:
This parameter displays a list of all the
defined frequency converte
r parameters
available for Profibus.
9-83 Defined Parameters (4)
Array [1000]
Option:
No LCP access
Read-only
0 - 9999
*
0
Function:
This parameter displays a list of all the
defined frequency converter parameters
available for Profibus.
9-90 Changed Parameters (1)
Array [1000]
Option:
No LCP access
Read-only
0 - 9999
*
0
Function:
This parameter d isplays a list of all the frequency
converter parameters deviating from defa ult setting.
9-91 Changed Parameters (2)
Array [1000]
Option:
No LCP access
Read-only
0 - 9999
*
0
Function:
This parameter displays a list of all the frequency
converter p arameters deviating from default s etting .
9-92 Changed Parameters (3)
Array [1000]
Option:
No LCP access
Read-only
0 - 9999
*
0
Function:
This parameter displays a list of all the frequency
converter p arameters deviating from default s etting .
9-93 Changed Parameters (4)
Array [1000]
Option:
No LCP access
Read-only
0 - 9999
*
0
Function:
This parameter displays a list of all the frequency
converter p arameters deviating from default s etting .
*
default setting ()display text []value for use in communication via serial communication port
220
MG.33.B
6.22 - V LT is a registered Danfoss trademark

Danfoss FC 300 Specifications

General

Enclosure	IP20
Approvals	cUL, UL, CE
EMC filter	Built-in
Communication Options	CANopen, PROFIBUS DP
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Output Voltage	0-100% of supply voltage