Chapter 7 Optional AccessoriesMH300
After copying is done, the keypad automatically
returns to this screen.
Press the Right key to see the date of the program
copied.
Press the Right key to see the time of program copied.
12. Display setup
Press to go to the
setting screen.
1. Contrast
Press the Up / Down keys to adjust the setting
value.
For example, increase Contrast to +10.
After you set the value, press ENTER to see the
screen display after contrast is adjusted to +10.
Then press ENTER and decrease the Contrast to
-10.
Press ENTER to see screen display after contrast
is adjusted to -10.
2. Back-light
Press ENTER to go to the Back-
Setting screen.
To Next Page
Loading...
