Delta MH300 Series - Page 254

Chapter 10 Digital Keypad
MH300
10-5
C. Application Selection Page
The Application Selection page displays APP, but does not show the APP page when Pr.13-00 = 0
The description of Pr.13-00 setting is as follows:
Pr.13-00 = 0
The application selection is inactive and does not show on the display.
Pr.13-00 = 1 specifies a user-defined application, and the keypad displays “USER”.
Pr.13-00 = 2 specifies the Compressor application, and the keypad displays “CoPr”.
Pr.13-00 = 3 specifies the Fan application, and the keypad displays “FAN”.
Pr.13-00 = 4 specifies the Pump application, and the keypad displays “PUMP”.
Pr.13-00 = 5 specifies the Conveyor application, and the keypad displays “CnYr”.
Pr.13-00 = 6 specifies the Machine Tool application, and the keypad displays “CNC”.
Pr.13-00 = 7 specifies the Packing application, and the keypad displays “PACK”.
Pr.13-00 = 8 specifies the Textile application, and the keypad displays “TILE”.