Chapter 13 Warning Codes|MH300
ID No.
Display Warning Name Description
95
Copy PLC: PLC
function (CPLF)
KPMH-LC01
Copy PLC function must be executed
when PLC is disabled.
Action and Reset
Action level Software detection
Action time Immediately act
Warning setting parameter N/A
Reset method Manual reset
Reset condition Directly reset
Record N/A
Cause Corrective Actions
PLC function is enabled when
KPMH-LC01 is running PLC
copy
Disable the PLC function first, and then run the PLC copy function again.
To Next Page
Loading...
