Dieci SAMSON AGRI MAX - Anti-Tipping Device

8 | Components description
100 DOCMA0000006‐UK ﴾ENG﴿ ‐ Samson FPT 3A
8.2.15 Anti-tipping device
Thevehicleisequippedwithanelectronicantitippingdevicethathasthepurposetohelptheoperatorto
usethevehiclesafelywithdifferentacousticandvisualwarningsignalsaccordingtothevehicleoverturning
danger.
Theantitippingdeviceisalwaysactive.
WARNING
This device can not replace the good experience of the operator in using the vehicle
safety; the operator is the only one responsible for the safe operation of the vehicle and
compliance with all safety standards prescribed.
The operator must be able to determine if the data provided by the instrument are correct and real, using
them for a safe use of the vehicle. When checking the loaded weight, make sure that this is lifted from the
ground. When turned on, the device starts a self-diagnostic program to check the proper operation of
itself and of the transducers. In case of failure, the device sets itself in safety status and blocks the
operations.
Thereforetheoperator,beforestartingtowork,mustmakesurethattheinstrumentoperatescorrectly:
– Correctsettingscheck.
– Checkthesizesindicatedonthedisplay.
– Checkformessagesandalarmsonthepanel.
– Checkthatthedeviceoperatescorrectly.
Theoperatormust,incaseofanytypeofanomaly,toimmediatelycontactanauthorizedworkshoporaDIECI
authorizedservicecenter.
WARNING
The operator is responsible for selecting the correct settings depending on the equipment
installed on the vehicle. When it is turned on, the last configuration used is set
automatically until it is changed.
An incorrect setting of the accessory may cause undesired operation of the device and therefore create a
dangerous situation of operation.
It is not possible to use the vehicle with equipment other than that set on the device.