Dieci SAMSON AGRI MAX - Power Take off Emergency Stop

Agriculture components description | 9
DOCMA0000006‐UK ﴾ENG﴿ ‐ Samson FPT 3A 165
– Press the "Deadman" button on the joystick and adjust the
rotationspeedofthehydraulicPowerTakeOffrollermoving
forwardtheservicesroller.
– ThePowerTakeOffrotationwillremainactiveaslongasthe
servicesrollerisactivatedonthejoystick.
NOTICE
If the continuous oil function option in present, it is possible to maintain a constant volume of oil passing
through the hydraulic sockets without acting consistently on the selector of the joystick.
Refer to the related chapter to activate and deactivate the Continuous oil function.
CAUTION
After activating the switch, the Power Take Off immediately begins to rotate.
Before starting the Power Take Off insert the cardan shaft.
Stay at a safe distance from the cardan shaft.
Before starting the Power Take Off make sure that nobody is near the PTO, the cardan shaft and the
mechanical user of the socket.
NOTICE
If the Power Take Off is subjected to stresses greater than the nominal ones provided by the
manufacturer, the automatic deactivation occurs with rotation stop.
9.5.3 Power Take Off emergency stop
In emergency conditions, the hydraulic Power Take Off can be
stopped using the Emergency stop button located on the left
rearsideofthevehicle(fig.1503071).
Thepressureexertedontheemergencystopbuttonactivatesthe
powersupplycuoffandtheconsequentcompleteshutdownof
themachineandanyconnectedequipment.