Dieci SAMSON AGRI MAX - Emergency Stop

Components description | 8
DOCMA0000006‐UK ﴾ENG﴿ ‐ Samson FPT 3A 87
To remove the belt it is necessary to:
1. Presstheredbutton“1”onthebuckle“2”.
2. Thenremovethelatchplate“3”.
1504163
WARNING
Drive the vehicle only with safety belt properly worn, fastened and adjusted.
Operating without the seat belt fastened increases the risk of accidents.
Do not use damaged or worn seat belts. If worn, damaged or yielded belts are used, they can break or
yield in case of collision resulting in serious injury to the operator.
8.1.17 Emergency stop
In emergency conditions, the machine can be stopped using
theEmergencystopbuttoninthecab(fig.1504201);thestop
occursimmediately.
150420-1
CAUTION
It is recommended to use the emergency stop button only in case that there is an immediate danger to
the operator, to the load and/or to the integrity of the machine.
Thepressureexertedontheemergencystopbuttonactivatesthepowersupplycuoffandtheconsequent
completeshutdownofthemachineandanyconnectedequipment.
The return to normal working conditions, after a stop caused by the emergency stop
button, is only possible after:
– Removalofthecausethatcausedthestop
– Releasingtheemergencystopbutton
Toreleasetheemergencystopbutton,rotateitinthedirectionindicatedbythearrowprintedonthebutton.