9 | Agriculture components description
164 DOCMA0000006‐UK ﴾ENG﴿ ‐ Samson FPT 3A
Deactivate the Power Take Off after each use.
Failure to observe these instructions may result in serious injury or death.
DANGER
It is necessary that the Power Take Off guard is always installed, lowered and in good
condition when using the equipment activated by the Power Take Off.
Use only power take-offs and universal joints with appropriate protective equipment.
DANGER
Risk of being trapped.
Do not wear loose clothing while using equipment activated by the Power Take Off.
WARNING
Do not use the tool with a Power Take Off speed higher than recommended. This may damage the
machine due to vibration, resulting in loosening of the parts and launch of debris.
WARNING
The technically possible inclination of cardan joints depends on the shape and dimensions of the
protective shield.
DANGER
It is strictly forbidden to:
a) Adjust,lubricate,cleanordisconnectmachinewiththeenginerunning.
b) OperatethevehicleconnectedtothePowerTakeOffatspeedshigherthanthosespecified.
c) SteponthePowerTakeOffguard.
d) ConnecttheequipmenttothePowerTakeOffwiththemachineinmotionormoving.
e) ActsimultaneouslyonthecontrolsinthecabandontheexternalcontrolsofthePowerTakeOff.
f) StaynearthePowerTakeOffduringitsuse.
9.5.2 Use of hydraulic power take off
ThetaskofthePowerTakeOfffittedontherearofthemachineis
tooperate,througharotarymotion,thecarriedortrailedtools.
ThehydraulicPowerTakeOffisconstitutedbyahydraulicmotor
connectedtotherearhydraulicsocketsthroughquickcouplings.
To properly activate the Power Take Off hydraulic it is
necessary to:
– Verifythat the quick couplings of the hydraulic Power Take
Offareproperlyconnectedtotherearhydraulicsockets.
– Select the rear hydraulic coupler to which the hydraulic
Power Take Off is connected through the rear couplers
selector.
– Bringthemachineenginebetween1000rpmand2000rpm.
150308-1