Equipment | 10
DOCMA0000006‐UK ﴾ENG﴿ ‐ Samson FPT 3A 207
10.7.5 Spreader forks use
CAUTION
Before starting to use the equipment, inspect and test it as described in the section "Equipment pre-use
check".
DANGER
Before each use, check the wear status of the forks, they could be worn out and not hold
the load to be handled creating a dangerous situation.
Before starting to use the equipment, refer to the chapters:
a) "Safetyregulations"
b) "Safeworkingprocedures"
WARNING
Before using the fork stretcher, make sure that its movements are correct.
If the joystick controls do not correspond to the correct movements of the forks, interchange the position
of two hydraulic hoses on the quick connectors on the boom head.
To use the fork spreader it is necessary to select the hydraulic
coupleronthecorrespondingboomheadandmovetheservices
control.
NOTICE! Refer to the joystick chapters to know the
commands related to the use of the service rollers.
150556-1