Dieci SAMSON AGRI MAX - Deactivating the External Parking Brake Manually

8 | Components description
110 DOCMA0000006‐UK ﴾ENG﴿ ‐ Samson FPT 3A
8.3.3 Deactivating the external parking brake manually
The parking brake must be disengaged directly on the axle to
allowthevehicletobetowed.
– Placesafetywedgesunderthewheelstopreventthevehicle
frommovingsuddenly
– Placeascrewdriverontopofthecrown(fig.1505621)
– Witharubbermalletgiveasharpblowonthehandleofthe
screwdrivertopushthecrowninwardtoreleasethelock.
– With the crown unlocked at the stroke end, towards the
outside of the machine (fig. 1505622), the parking brake is
disengagedanditispossibletotowthemachine.
1505621
1505622
NOTICE
The parking brake, even if disengaged, will return automatically into operation when the engine is
started.
DANGER
Never use the vehicle with the negative parking brake disengaged/disconnected.