Dieci SAMSON AGRI MAX - Fork Spreader; Fork Spreader Identification; Fork Spreader Description

Equipment | 10
DOCMA0000006‐UK ﴾ENG﴿ ‐ Samson FPT 3A 205
10.7 Fork spreader
NOTICE
The Fork spreader is an optional equipment.
10.7.1 Fork spreader identification
Theequipmentinquestionallowstovarythedistancebetweentheforksinstalledonit.
The data necessary for the identification are positioned on the
rightsideoftheequipment,intheupperpart“A”(fig.1505531).
A
150553-1
Belowaretheidentificationdata(theirordermaybedifferentontheforks).
1Model
………………………………….
4
5
6
7
2
3
1
150553-2
2Serialnumber
………………………………….
3Yearofmanufacture
………………………………….
4Mass(Kg)
………………………………….
5Capacity(Kg)
………………………………….
6  Maximum hydraulic pressure
(bar)
………………………………….
7Centerofgravity(mm)
………………………………….
Toensureapromptandefficientservice whenorderingpartsorwhenrequestinginformationortechnical
clarificationalwaysspecifytheidentificationdetails.
Thereforewerecommendtonotethedatarelatingtotheaccessoryinyourpossessioninordertosafelyand
quicklyidentifytheminthefuture,incaseofneed.
10.7.2 Fork spreader description
Theforkspreader(fig.1505541)consistofthefollowingmaincomponents: