Dieci SAMSON AGRI MAX - Quick Coupling with Single Lock on Open Circuit Machine

Components description | 8
DOCMA0000006‐UK ﴾ENG﴿ ‐ Samson FPT 3A 133
8.11.2 Quick coupling with single lock on open circuit machine
To use the quick coupling (fig. 1502064) for the equipment
installationitisnecessaryto:
1. Carry out the normal hooking operations set out in
paragraphs 1, 2, 3 and 4 of the chapter "Equipment
installation".
2. Select the sockets on the boom head “A” (fig. 1502065)
throughtheHydraulicsocketsselector"1"(ifpresent).
3. PresstheQuickCouplingbutton"1"(fig.1502066)andatthe
sametimeoperatetherollerontheservicesjoysticktoopen
thequickcoupling.
4. Keepthequickcouplingopen,tilttheplateupwardtomake
sure that the equipment is fully resting on the tool holder
plate.
5. Release the roller on the services joystick and the Quick
couplingbutton“2”toclosethequickcouplingandlockthe
equipment.
6. If the equipment is not properly fastened, repeat the
installation.
150206-4
2
1
A
B
C
D
150206-5
1
150206-6
DANGER
Do not operate without having properly secured the equipment to the plate, danger of load and
equipment falling.