Dieci SAMSON AGRI MAX - Fork Spreader Installation; Fork Spreader Maintenance

10 | Equipment
206 DOCMA0000006‐UK ﴾ENG﴿ ‐ Samson FPT 3A
1Fixedbase
2Forks
3Equipmentfasteninghole
2
3
1
150554-1
NOTICE
The equipment fastening hole located at the forks end can only be used for fastening certain equipment
to the forks. For the fastening procedures refer to the manual of the equipment.
10.7.3 Fork spreader installation
NOTICE
For the fork spreader installation, refer to the chapter "Equipment installation".
10.7.4 Fork spreader maintenance
NOTICE
For the fork spreader maintenance, refer to the chapter "Forks check".
Theforkspreaderrequiresmaintenance(fig.1505551).
– Useonlysiliconeoiltolubricatethechromeplatedcylinders
"1".
– Usegreasetolubricatetherailsforslidingbetweenthefixed
baseandthetranslatingsupport"2".
1
2
150555-1
WARNING
Do not use grease to lubricate the movable hydraulic parts or chrome plated cylinders.
Use only silicone oil and clean them frequently.