Equipment | 10
DOCMA0000006‐UK ﴾ENG﴿ ‐ Samson FPT 3A 181
DANGER
In case, for deformation, the pin and the related safety pin do not reach the required position, it is
absolutely forbidden to use the accessory as it may come off and fall to the ground dangerously.
DANGER
It is forbidden to operate without the safety pin installed on the tool holder plate.
WARNING
When using an equipment that has electrical or hydraulic connections these must always be correctly
connected to the machine. Failure to connect does not allow the proper operation of the safety devices
with risk of damage to property and persons and risk of machine tipping.
DANGER
It is forbidden to operate with a mode of use of the machine not suitable for the type of equipment
installed. The electro-hydraulic equipment will not work correctly and safety devices will not be in
operation creating a risk of damage to property and people and the vehicle overturning.
DANGER
It is forbidden to operate without the proper capacity diagram related to the machine and
to the equipment installed.
For more details on the accessory installation procedures or warnings, consult the use and maintenance
manual of the accessory.
CAUTION
Before each use, check that:
a) Theequipmentisproperlyhookedtoallthepinsandhooksareinsertedinthecorrectposition.
b) Thereisnodamage,deterioration,deformationoftheequipmentlockingcomponents
c) Ifpresent,theelectriccablesorhydraulichosesareingoodconditionanddonotcreatehindrancewhile
usingtheequipment
d) Themodeofoperationofthemachineisconsistentwiththetypeofequipmentinstalled
e) Inthecabtherearethecapacitydiagramsrelatedtothemachineandtotheequipmentinstalled.