111
Chapter 5 3 Periodic Maintenance Check List
5
S2-Y1540
3 Periodic Maintenance Check List
Section to be checked Description Description
Sensors Cleaning Use a brush to clean any paper dust, etc.
Timing belt Checking Inspect Belts for signs of wear or loss of tension.
Replace any cracked or worn belts, and retention as
required.
Cutter Oiling Use a brush to clean any paper dust, etc.
Feed Belts Cleaning Use a brush to clean any paper dust, etc.
Gears Greasing
Springs Greasing
Slider Greasing
6-month Periodic Checks
-0
To Next Page
Loading...
