Chapter 1 1 Specifi cations
S2-Y1540
12
1 Specifi cations
-0
Model name DC-616
Product type Slitter/Cutter/Creaser Floor stand model
Feeding method Belt suction
Infeed document size Width: 210–320 mm
Length: 210–670 mm*
* The standard feed tray takes up to 460 mm. For longer sheet, the
optional long paper tray is available.
Minimum fi nishing size Width: 48 mm (1.89 in)
Length: 50 mm (1.97 in)*
The distance between the lead edge of the last card and the trail edge
of the parent sheet should be 67 mm or more.
Document type Uncoated, coated, laminated*
* Laminated document is not included in the specifi cations of the
perforation unit.)
Document weight 110 gsm–350 gsm
Paper curl Within 5 mm
Feeder capacity 100 mm
Speed 10 ppm (A4 SEF, 2 cuts, 1 crease)
Number of slits Max 6 slits per document (2 margin slitters and 4 center slitters)
Margin slit spec 3.2–55.0 mm from document side edges
Gutter slit width 5.0–15.0 mm
Gutter slits wider than above are exited onto the exit tray.
Gutter defl ector Max 2 gutter slits can be defl ected.
Number of cuts
Max 25 per document
Cut position spec Lead edge: min. 3.0 mm
Gutter cut: min. 3.0 mm
Trail edge: min. 5.0 mm
Number of creases Max 20 per document
Crease depth adjustment 3 steps (from control panel)
Tolerance +/-0.3 mm from programmed positions
(+/-0.4 mm with business cards)
When creasing, it may fl uctuate depending on the number of creases
and their depths.
Stacker capacity 100 mm (with card stacker: 40 mm)
Control panel 64×128 dots LCD
LCD languages Japanese, English, French, German, Italian, Spanish, Polish, Russian
Software update DDL-01, DDL-02
Perforation unit Operator replaceable unit
Max 2 perforations parallel to the feeding direction
Manual positioning
Perforation position Minimum distance from the card side edge: 5 mm
Minimum distance between 2 perforations: 48 mm
Perforation tool spec Cut: 0.84 mm Tie: 0.84 mm
To Next Page
Loading...
Need help?
General
