1
S2-Y1540
The cause of most accidents is failure to adhere to basic safety rules and observe
safety instructions. It is important to prevent potential causes of accidents from
occurring. In order to do so, read this manual carefully, and be sure to understand
all the safety instructions and correct inspection and servicing procedures that it
provides before beginning repair or servicing work.
Repairing or servicing the machine with insuffi cient knowledge about it could lead
to unforeseen accidents.
It is not possible to anticipate and describe in a manual such as this every possible
hazard that could arise in the course of repair and servicing. Therefore, besides
observing the safety instructions marked in this manual and on the machine’s
labels,
service person should be safety-conscious and take other safety precautions
as necessary. When performing repair or service work not covered by this manual,
you should obtain safety guidance from an appropriately knowledgeable person.
Introduction
PLEASE NOTE
In the interests of upgrading our product, specifi cations and other data given in this manual are
subject to change without notice.
If the manual contains anything that you do not understand, contact the dealer for clarifi cation.
Trademarks
• Microsoft, Windows, Windows NT, and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
All other company names and product names shown in this manual are trademarks or
registered trademarks of their respective companies.
-0
To Next Page
Loading...
Need help?
General
