134
Chapter 7 6 HELP Mode
S2-Y1540
2. Operating Procedure
(1) Display the count
1. Access the HELP Mode “02”, and press the <START> key.
2. Press the UP/DOWN cursor key to switch pages.
Total: Total count is shown.
3. Press the <STOP> key. It will return to the HELP Mode selection
screen.
(2) Reset the count
1. Access the HELP Mode “02”.
2. Continuously press the <C> in the NUMERIC key for about
3 seconds, and the reset count will be reset with the beeping
sound.
REFERENCE
Total count cannot be reset.
-0
3. Press the <STOP> key. It will return to the HELP Mode selection
screen.
To Next Page
Loading...
Need help?
General
