DURKOPP ADLER 745-35-10 S - Page 101

Corner knives
Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017 99
Fig. 81: Setting the corner knife parameters (2)
Fig. 82: Setting the corner knife parameters (3)
Symbols Meaning
Set corner knife correction seam begin.
• Value range: -99.9 - 99.9
Set corner knife correction seam end
• Value range: -99.9 - 99.9
Set middle knife
• Distance of middle knife incision to seam ends (X)
• Value range: -99.9 - 99.9
• This value depends on the needle distance and the corresponding
corner knife
Set corner knife correction seam begin. left
•only for configuration: Automatic corner knife station
• Value range: -13 - 13
• The knife supports (2) and (3) must be parallel to one another
Set corner knife correction seam end left
•only for configuration: Automatic corner knife station
• Value range: -13 - 13
• The knife supports (1) and (4) must be parallel to one another