Stacker
158 Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017
14.1.4 Setting the cylinder speed
You can use throttle valves (1) and (3) fitted on cylinders (2) and (4) to set
the speed.
Fig. 137: Setting the cylinder speed
To set the cylinder speed:
1. Set the throttles on the cylinders (2) in such a way that the lever reaches
its end position rapidly, but not abruptly.
14.1.5 Setting the tray position
The height of the stacking bracket (1) with storage table (4) can be adjust-
ed so that workpieces of varying length and bundles of varying thickness
can be stacked.
Fig. 138: Setting the tray position
(1) - Throttle valve cylinder 1
(2) - Cylinder
(3) - Throttle valve cylinder 2
(4) - Cylinder
(1) - Stacking bracket
(2) - Clamping lever
(3) - Locking lever
(4) - Storage table
To Next Page
Loading...
