DURKOPP ADLER 745-35-10 S - Aligning the Corner Knife Station with the Seams

Corner knives
Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017 103
6.4 Aligning the corner knife station with the seams
Fig. 86: Aligning the corner knife station with the seams (1)
Proper setting
The corner knife cuts must be symmetrical to the seams.
To align the corner knife station with the seams:
1. Iron a piece of Vlieseline onto the workpiece.
 This makes the corner knife cuts more visible.
2. Sew a test seam.
3. Check seam and cutting pattern.
WARNING
Risk of injury from sharp parts!
Cutting possible.
Adjust the corner knife station only when the
sewing unit is switched off.