Corner knives
Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017 97
6Corner knives
6.1 Setting the initial position of the corner knives
Fig. 79: Setting the initial position of the corner knives
Information
To precisely set the position of the corner knives (1), start by bringing all
four corner knives to a initial position.
To set the initial position of the corner knives:
1. Loosen the screw (2).
2. Turn the corner knife holders (4) in such a way that the face sides (3)
are in front of each other.
3. Tighten the screw (2).
4. Adjust the other knife holders as described above.
WARNING
Risk of injury from sharp parts!
Cutting possible.
NEVER reach into the area of the corner knives.
Set the corner knives only with utmost caution and
with the sewing unit switched on.
(1) - Corner knives
(2) - Screw
(3) - Face side
(4) - Corner knife holder
To Next Page
Loading...
