DURKOPP ADLER 745-35-10 S - Setting the Exact Position of the Laser Marking

Marking lamps
Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017 113
7.3 Setting the exact position of the laser marking
Fig. 96: Setting the exact position of the laser marking (1)
Fig. 97: Setting the exact position of the laser marking (2)
(1) - Needles
(2) - Cutting line
(3) - Marking of the front positioning point
(varies with the setting of the sewing
length)
(4) - Middle of pocket opening (varies with
the setting of the sewing length)
(5) - Marking of the rear positioning point
(6) - Edge of the sliding plate (measuring
line)
①② ④ ⑤ ⑥③
Sewing head
Operator
645
73
821