DURKOPP ADLER 745-35-10 S - Page 155

Additional equipment
Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017 153
Setting the tape puller
Fig. 133: Setting the tape feeding and tape cutting device (2)
The stops must be adjusted in such a way that enough tape is pulled off
for the next pocket.
To set the tape puller:
1. Shift the screw (2) to pull off more tape.
2. Set the throttle valves so as to avoid any after-run of the roller.
(1) - Tape roll holder
(2) - Screw
(3) - Tape puller
③
②
①