Programming
Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017 203
To set the seam securement of the left needle:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
The user interface for setting the desired item is displayed.
Information
If the seam pattern is straight, you only have to set the left seam
securement.
Set securement seam beginning right needle
Information
The settings in subitem Securement seam beginning right
needle must be made in the exact same way as in subitem Securement
seam beginning left needle ( p. 202).
Set securement seam end left needle
The display switches to Securement seam end left needle.
Fig. 176: Set securement seam end left needle
To Next Page
Loading...
