Edwards GXS Series User Manual

Table 28 PDT displays
Pump state
Local control
LED
PDT display Operator Pump response
Press Start buon PDT displays:
Stopped On START MENU
Start Pump
Press ENTER to conrm Pump starts
Running On Pump Running
Press CANCEL
Press CANCEL No change
(running)
Stopped or Running O No PDT Control
Press CANCEL
Press CANCEL No change
Press Stop buon PDT displays:
Stopped On PUMP Stopped
Press CANCEL
Press CANCEL No change
(stopped)
Running On STOP MENU
Auto Shutdown
If Fast Shutdown is
required, press the
down arrow. Press
ENTER to conrm
Pump stops
Stopped or Running O No PDT Control
Press CANCEL
Press CANCEL No change
9.3 Event/warning/alarm display and acknowledgement
Each new event/warning/alarm is displayed when it occurs, overwring any text already
present unless another unacknowledged event/warning/alarm is currently being
displayed. The corresponding warning/alarm LED ashes to indicate a new event/
warning/alarm.
Pressing ENTER acknowledges the event/warning/alarm currently displayed and the
warning/alarm LED stops ashing. If available, the display will show the suggested
acon, press ENTER again to clear.
If there is another new event/warning or alarm the warning/alarm LED will connue to
ash and this is then displayed, otherwise the display will revert to the original text from
before the alarms/warnings/events occurred.
If there are warnings/alarms sll present, but they are all acknowledged, then the
corresponding LED remains connuously illuminated. The text indicang acknowledged
warning/alarm condions sll present may be viewed in the Status menu, refer to status
menu contents in Status menu on page 122. Some alarms such as 1.01 STOP ACTIVATED
remain present unl the pump is manually started from the PDT or front panel controls.
Once all warning/alarm condions have gone away, then the corresponding LED is
exnguished.
To avoid a build‑up of out of date warnings, they are automacally acknowledged aer
36 hours.
9.4 Menus
There are three menu buons NORMAL, STATUS and SETUP described below.
Page 121
M58800880_H - Pump display terminal

Edwards GXS Series Specifications

General

Brand	Edwards
Model	GXS Series
Category	Water Pump
Language	English