EasyManuals Logo

Edwards GXS Series User Manual

Edwards GXS Series
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #167 background imageLoading...
Page #167 background image
If a PDT is ed, the warning LED ashes to indicate a new warning. Refer to Event/
warning/alarm display and acknowledgement on page 121 for more informaon on how
warnings are indicated and how they can be acknowledged using the PDT.
Once all the warnings are cleared, the warning LEDs exnguish.
10.2.2 PDT warnings
If a PDT is ed, each warning triggers a warning message to be displayed. Refer to
Event/warning/alarm display and acknowledgement on page 121 for more informaon
on how the warnings are handled by the PDT.
lists the warning messages that might be displayed on the PDT with possible causes and
acons that should be taken.
Table 55
Warnings
Warning message on PDT Acon message on PDT
Warning 1.01 - Power interrupt on page 163 Check pwr supply
Warning 34.01 - N2 purge low on page 164
N
2
purge low
Check N
2
supply
Warning 39.11 - Exh Press High on page 164
Exhaust Blocked
Service Pump
Warning 39.13 - Sensor missing on page 164 -
Warning 51.13 - Sup Missing on page 164 See manual
Warning 54.11 - MB Temp High on page 164 See manual
Warning 54.13 - Sensor missing on page 164 -
Warning 55.11/ Warning 63.11-DP Temp High on page 164 See manual
Warning 55.13/ Warning 63.13-Sensor missing on page 165 -
Warning 71.13 - AC Sup missing on page 165 See manual
Warning 152.01 - Valve Not Shut on page 165 Check ISOL Valve
Warning 153.01 - Valve Not Open on page 165 Check ISOL Valve
Warning 176.01 - MB INV xxxx yyyy on page 165
xxxx yyyy
aaaaaaaaaaaaaaaa
Warning 176.13 - No MB Inv Comms on page 165 See manual
Warning 186.01 - DP INV xxxx yyyy on page 165
xxxx yyyy
aaaaaaaaaaaaaaaa
Warning 186.13 - No DP Inv Comms on page 166 See manual
Warning 196.01 - DP Inv xxxx yyyy on page 166 Diag aaaa bbbb/zzzzzzzzzzzzzzz
Warning 196.13 - No DP Inv Comms on page 166 See manual
Warning 314.11 - DP Speed Too Low on page 166 Stop Pump/Contact Service
Fault
Warning 1.01 - Power interrupt
Cause There has been a brownout of the electrical supply to the pump
lasng more
than 1 second.
Remedy Check the electrical supply.
Page 163
M58800880_H - Fault nding

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edwards GXS Series and is the answer not in the manual?

Edwards GXS Series Specifications

General IconGeneral
BrandEdwards
ModelGXS Series
CategoryWater Pump
LanguageEnglish

Related product manuals