2. Check that all the connecons are secure, ghten any loose connecons. Inspect
all cables, pipelines, hoses and connecons and check that they are not corroded
or damaged and do not leak, repair or replace any pipelines, hoses and
connecons that are corroded or damaged, or which leak.
3. Ret the enclosure side and top panels.
For the areas with hard water or sites with the poor cooling water quality it may be
necessary to clean the cooling water pipes to prevent blockages and reducons in
cooling eciency. The equipment and chemicals for pipe cleaning are commercially
available. Contact us for more informaon.
5.5 Overhaul
WARNING:
Do not aempt to overhaul the pump without our training and tooling.
We provide a full range of overhaul opons worldwide. We can provide training, tooling
and spares to enable the users to overhaul their pumping systems. Contact us for more
informaon.
Page 73
M58800880_H - Maintenance
To Next Page
Loading...
