Edwards GXS Series User Manual

Table 36 Booster pump start opons menu
Opon Text on PDT line 2
Opons on PDT line 2 aer pressing
Enter
Booster start mode BP Start Mode Select from:
Manual
Time Delay
Booster controller if in Time
Delay Mode
BP delay aer.. Select from:
Dry pump
Inlet isolaon valve
Booster start delay BP start delay.. Range 1-200 seconds*
* Scroll through the opons by pressing the UP/DOWN keys. Press ENTER to accept the
new seng. Press CANCEL to exit back into the Booster pump start opons menu.
Press the UP/DOWN keys to select the new sengs and press ENTER to accept or
CANCEL to exit back to the Booster pump start opons menu.
9.4.9 MicroTIM opons menu
Scroll by pressing the UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to
exit back to the Set sequences menu.
Table 37 MicroTIM opons menu
Opon Text on PDT line 2 Opons
on PDT line 2 aer pressing Enter
Set MicroTIM
Input 2
Input 2 ...
Select from:
Green Mode
Booster
Isolaon Valve
PID Enable
Second speed control
Set MicroTIM
Output 4
Output 4 ...
Select from:
Isolaon Valve
Warning
Booster
N
2
Flow
Water Flow
Exhaust Pressure
Control status
On Process State
Semicon Outputs
Use the UP/DOWN arrow to change and enter to select.
9.4.10 DP clean menu
Scroll by pressing the UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to
exit back to the Set sequences menu.
Page 126
M58800880_H - Pump display terminal

Edwards GXS Series Specifications

General

Brand	Edwards
Model	GXS Series
Category	Water Pump
Language	English