Edwards GXS Series User Manual

Conguraon Display
Domain Name... (display only)
* Press UP/DOWN keys to select Enabled or Disabled and press ENTER to accept or
CANCEL to exit back to the IP Conguraon menu.
† For each digit seng press the UP/DOWN keys to set the digit, press ENTER to accept
and move to the next digit or CANCEL to move back to the previous digit. Pressing ENTER
at the end of the line will accept the new seng and exit back to the Set Clock menu.
Pressing CANCEL at the start of the line will cancel and exit back to the IP Conguraon
menu.
Display only items press CANCEL to exit back to the IP conguraon menu.
9.4.24 Display menu
Under the Setup menu. Scroll by pressing the UP/DOWN keys. Press ENTER to open a
sub menu or CANCEL to exit back to the Setup menu.
Table 48
Display menu
Display
Units...
Normal display (Selects the parameters displayed in Normal)
Auto Scroll
Scroll Delay
UNITS (units to display)
Scroll by pressing the UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to
exit back to the Display aributes menu.
Table 49 Units
Parameter
Key
Pressure... (PSI/kPa/mbar)
Temperature... (Cengrade/Farenheit/Kelvin)
Speed... (rpm/Hz)
Acve Gauge... (mBar/Torr/kPA)
In each opon, scroll through the units available by pressing the UP/DOWN keys. Press
ENTER to select the displayed units or CANCEL to exit back to the Units menu.
SELECT LINE (Normal display selecon menu)
Scroll by pressing the UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to
exit back to the Display aributes menu.
Table 50
Selecon menu
Parameter
Top Page 1...
Boom
Page 1...
Top Page 2...
Page 132
M58800880_H - Pump display terminal

Edwards GXS Series Specifications

General

Brand	Edwards
Model	GXS Series
Category	Water Pump
Language	English